Dodo Mat Dead-EZY Sound deadening mat, 40 Sheets, 40 sq.ft (3.7sq.m), car & Van
Dodo Mat Dead-EZY Sound deadening mat, 40 Sheets, 40 sq.ft (3.7sq.m), car & Van Sound proofing, Vibration Damping
- 40 Sheet Sound Deadening Pack with butyl construction and embossed aluminium
- Dead Easy to fit van conversion sound deadening, designed in the UK
- DEAD-EZY Deadening provides a lower weight solution for the car/van owner wanting a quiet drive without adding unnecessary mass.
- Reduce rattles, Vibration & noise – Lower vehicle road, Exhaust, Engine & transmission noise
- Very soft & flexible for easy installation, 1.5mm thick with self adhesive, Individual sheet size: 375 x 250mm, 40 Sheet Pack coverage 40 sq.ft (3.7 sq.m)
DEAD-EZY products have been carefully selected to offer value for money and cover the key aspects of van building, while being easy to install and maintaining the UK quality control you have come to expect from Dodo Mat. Dodo Mat DEAD-EZY Deadening is our entry level self adhesive, foil backed sound deadening vibration damper. Simply cut, peel & stick the Sound Deadening on the interior sheet metal of any vehicle to reduce unwanted vibrations & structural noise. Dead Easy to fit! Make those panels as dead as a Dodo. DEAD-EZY Deadening provides a lower weight solution for the car/van owner wanting a quiet smoother drive without adding unnecessary mass. The unique Dodo specification chemistry of the synthetic butyl core effectively deadens panel vibration without the excessive bulk of competitor products. The distinctive top sheet is purposely designed to be aid installation and mould easily on more complex surfaces.
-
- Dodo Mat Dead-EZY Sound deadening mat
-
- 40 Sheets
-
- 40 sq.ft (3.7sq.m)
-
- car & Van Sound proofing
-
- Vibration Damping
| SKU: | B0CLLSQ1YD |
| Dimensions: | 37.5L x 25W centimetres |
| Brand: | Dodo Mat |
| Model: | DEAD-EZY 40 Sheets |
| Part: | DOD-EZ-40SHEETS |
| Manufacture: | Dodo Mat |
| Origin: | China |
I applied this in near freezing conditions and it went on a treat and stuck very well. It does what it’s supposed to. I used one box on a swb caddy van.
This stuff is da bomb. Easy to use with a minimum of prep and fuss. The difference it’s made to my van is mind boggling.
Just make sure you purchase a set of rollers to fully adhere them to the panel and some fairly sturdy work gloves too as the edges can and will slice.
I’ve watched all the videos and researched all the competition and this stuff is exceptional especially considering it’s entry level (which by the way is far better than some of the horrendous Chinese knockoffs)
Using it as stage one in a 1988 defender – at 100% coverage in front footwell, gear tunnel, bulkhead and seat box – with more spaced out single sheets on roof, and side panels.
Update: 1 box EXACTLY fitted front of defender at 100% coverage. Was easy to work even on compound curves like the gearbox and bell housing.
Will be buying a roll of the Duo for rear tub floor and wheel arches with landy matting over. Will then decide on stage 2 for front sides and roof – with carpet over.
Will 100% be using dodo for it all.