Dolphin Automotive DPS450X Reverse Parking Sensors Audio With LED Display (Gloss

Dolphin Automotive DPS450X Reverse Parking Sensors Audio With LED Display (Gloss Black) | Ultrasonic Radar Semi Flush Insert Sensors. DIY Fitting On Rear In Black White Silver Red Grey.

• Parking Sensor Kit With 4 Sensors In Your Colour Choice From A Range Of Colours. Paint Colour Is Baked On In Factory Rather Than Retro Sprayed For A Lasting Finish. If You Want To Spray Your Own Colour Then Order Matt Black.
• This Kit Is Designed For The Display To Mount On The Dashboard. You Get Audio & Distance Alerts From Over 1m to 30cm Starting With Slow Beeps To Continuous Tone At 30cm. The Display Will Countdown In 10cm Units. Parking Sensors Connect To The Reversing Light For Power And So They Come On Automatically When You Select Reverse Gear.
• The Sensors Fit A 21mm Hole (Cutter Supplied) With a 25mm Outer Face To Leave A 2mm Overlap For A Neat Finish To Cover Where You Have Drilled The Holes In The Bumper. Please Check You Are Confident To Fit These Or Have An Installer Lined Up Before Purchasing.
• There Is A Waterproof Swap Socket On The Parking Sensor Cables 6 Inches From The Head For Ease Of Fitting & Replacement If Required. The Brain Box Has An Adjustable Sensitivity Control. This Is Tuned In The Factory For Optimum Use But Can Be Adjusted If Required.
• The Reversing Sensor Kit Includes a 21mm Hole Cutter, 1m Power Cable To Connect To Reverse Light, Brain Box, Dash Display On A 6m Lead (With Inbuilt Buzzer), 4 Sensors On 2.5m Cables & English Instruction Manual. Extension Leads Available For Sensors, Display Or Power Lead If you Have An Oversized Vehicle.
• Lifetime Warranty To Original Purchaser. For As Long As You Own The Vehicle We Will Warranty The Parking Sensors – Dolphin Parking Sensors Are Auto Express Award Winning. Established Since 1997. Dolphin Automotive is a brand of UK company Trading Direct Ltd based just outside Woking in Surrey. Established since 1997 we supply both to the trade & retail. VAT registered supplier, 12 months warranty and telephone support.

›

The Dolphin DPS450X is the latest version of our award winning parking sensor system with LED display. It is a 4 recess mounting sensor system manufactured to fit a wide range of cars and look like original fit equipment. This kit has 4 sensors as well as a digital display with inbuilt buzzer. The buzzer gives audible bleeps with increasing frequency as you get closer to an obstacle and a digital countdown in cm is displayed on the screen.

The unit is activated when reverse gear is selected. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone, warning you that you should stop the car. The display also has a left / right bar indication to let you know which side of the car is nearest to what you are reversing towards.

The sensors are on cables just over 2m long and should cover the width of most vehicles but we do have extension leads if needed. You mount the brainbox in the rear of the car, traditionally in a side panel behind one of the rear light clusters, so the sensor cables do not have to run to the front of the car. You connect the brainbox up to the reversing light for its power supply. The display is on a 6m cable length for you to run to the front of the car and again we have extension leads should you need one. The display has an adhesive underside for you to stick it to the dashboard. It is slimline and could also be stuck on top of the majority of car rear view interior mirrors.

Available in Various Colours

We have a range of colours available which are baked on in the factory so will not crack as can happen with retro spraying. The sensors require a 21mm hole (cutter supplied in box) and have a 25mm outer face leaving a 2mm overlap.

Adjustable Brainbox

Our new adjustable brainbox means that you have full control over the detecting distance that your parking sensors have from your car. This is particularly useful for cars with low bumpers or bumpers that are angled at the ground. It is not normally necessary to play with this setting but gives some flexibility with fitting if needed.

Swap Socket Feature

The kit has a watertight swap socket feature based 6 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problem with faulty sensors or accident damage in the future it facilitates easy replacement without having to rewire from scratch.

Customer ReviewsPriceSeparate BuzzerDash Display (integrated buzzer)Rear Roof DisplaySwap SocketsColoursSensor DiameterKit TypeAdjustable Sensitivity

	Add To Basket	Add To Basket	Add To Basket	Add To Basket	Add To Basket	Add To Basket
4.3 out of 5 stars721	4.3 out of 5 stars97	4.2 out of 5 stars13	4.3 out of 5 stars95	3.9 out of 5 stars17	4.3 out of 5 stars119
£49.99£49.99	£49.99£49.99	£59.99£59.99	£59.99£59.99	£69.99£69.99	£49.99£49.99
✓	no data	no data	✓	no data	✓
no data	✓	no data	no data	✓	no data
no data	no data	✓	no data	no data	no data
✓	✓	✓	✓	✓	✓
32	32	32	32	32	9
25mm	25mm	25mm	25mm	25mm	20mm
Rear Kit	Rear Kit	Rear Kit	Front Kit	Front Kit	Rear Kit
✓	✓	no data	✓	✓	✓