• Uncategorised

Transport Canada grounds 4 types of Bell helicopters following fatal Alberta crash investigation

Transport Canada has grounded four types of Bell helicopters after investigating a fatal crash in Alberta last month.

The crash happened approximately an hour west of Edmonton, with police telling Global News that the helicopter was helping fight a fire near Evansburg on June 28.

After investigating the crash, which involved a Bell 212 helicopter, Transport Canada issued an emergency airworthiness directive on Monday.

: Pilot killed in helicopter crash while fighting wildfire near Evansburg, Alta.: RCMP

According to Transport Canada, a strap pin in the main rotor hub sheared off during flight, which resulted in the detachment of the main rotor blade and main rotor head.

“It has been reported that the failed main rotor hub strap pin had only accumulated 20 hours of service,” Transport Canada said in the directive.

Story continues below advertisement

“Inspection of another Canadian Bell 212 helicopter found a main rotor hub strap pin of the same part number, made by the same manufacturer, with the same serial number prefix, to be deformed after only approximately 29 hours in service.

“Failure of a main rotor hub strap pin will result in detachment of the main rotor blade and loss of control of the helicopter.”

1:44 Deadly Canadian Forces helicopter crash linked with software glitch, report shows
Deadly Canadian Forces helicopter crash linked with software glitch, report shows – Jun 28, 2021

Transport Canada said although the defective strap pins were only reported on Bell 212 helicopters, strap pins of the same part number can be installed on Bell 204B, 205A-1 and 205B helicopters.

Trending Stories

Transport Canada also said while the cause of failure has not been determined, Bell has issued alert service bulletins as a precautionary measure. “To address the risk of detachment of main rotor hub strap pins in flight, this (airworthiness directive) is issued as an interim measure to mandate replacement of affected strap pins,” said Transport Canada. Story continues below advertisement

Global News has reached out to the BC Wildfire Service to see if any helicopters in its subcontracting fleet has been affected. BC Wildfire said it has reached out to those companies and is awaiting responses.

Transport Canada grounds 4 types of Bell helicopters following fatal Alberta crash investigation 1:01 Helicopter drawing water to battle wildfire near PentictonHelicopter drawing water to battle wildfire near Penticton – Sep 5, 2020

Global News also reached out to B.C. Emergency Health Services (BCEHS), which said its dedicated fleet of six helicopters (two in Vancouver; Nanaimo, Kamloops; Prince George; Prince Rupert) does not include the impacted Bell models.

“BCEHS does not have any models of the Bell helicopters impacted by this Transport Canada airworthiness directive (AD) as part of our dedicated fleet of air ambulance helicopters,” BCEHS told Global News. BCEHS said it does have one Bell aircraft, but it’s a different model. It also noted that it has 35 air carriers around the province who provide services as needed, and that “some of our contracted air carriers will be impacted by the Transport Canada directive.

They will be following procedural guidelines outlined by Transport Canada.” Story continues below advertisement Global News also reached out to Transport Canada for more information, but was told a fulsome response will be made available on Wednesday.

— With files from Phil Heidenreich

Transport Canada grounds 4 types of Bell helicopters following fatal Alberta crash investigation 1:50 Dramatic helicopter rescue of man and dog during California wildfiresDramatic helicopter rescue of man and dog during California wildfires – Nov 20, 2018

(C) 2021 Global News, a division of Corus Entertainment Inc.